Doorway Spill Barrier - Retention Barrier BL/BED-KB

Article Index: 032


  • Raising capability on one side

  • Folding capability

  • Modular system "D"

Manual Doorway Spill Barrier BL/BED-KB
Standard height:
100–500 mm
Standard length:
up to 6000 mm
Special situations:
up to 8000 mm
50 mm

Suitable for crack-free surfaces with up to 20 mm (± 20 mm) of floor/ground unevenness, e.g. concrete, corrugated sheet metal, tiles, stones, etc.

A special barrier for low room heights.

The Spill Barrier is comprised of two trapezoidal, integral hollow aluminium profiled sections. A compressible, highly adaptable special seal is affixed on their lower side and end faces.

The rotating mount and the tensioning device are securely mounted next to the opening to be secured and then sealed. The closure body is firmly bolted into the hinge. In the resting position, it stands vertically and is protected in accordance with accident prevention measures against being folded down unintentionally. When being used, the securing device is unlocked, the Containment Barrier is folded down manually, the “rider” is manually folded into the locking position, and the barrier is inserted into the tensioning device on the opposite side and locked into place. The contact pressure of the tensioning device is adjustable.

With certain lengths and heights, the closure barrier is counterbalanced with weights in the factory. Gas-charged springs are standard. Operation by means of a manual winch is recommended for very large barriers.

Barrier bodies and mounting fixtures are furnished with a red paint finish, preferably “traffic red” RAL 3020. The remaining metal components are galvanized or made of aluminium.